Posts Tagged ‘dlink’

Dlink Ant24-1201 Yagi WIFI Antenna

Friday, October 12th, 2007

Another Yagi whit interesting design, this time from Dlink.

Original link :

PDF Specification :


Gain should be around 12dbi.

And here it is what is inside : usual yagi directors are madded from aluminum /i think/ and pcb dipole used as feeding element.

vista_superior_126.jpg vista_inferior_152.jpgdlinkant241201mg7.jpg
You are wondering were did You saw similar dipole feeding ??? 🙂 I tell You :
The feeding of the dipole is very similar.

Dimensions for this antenna :


OpenWRT over DLink DWL2100AP ?

Saturday, October 6th, 2007

There a new second version of the tutorials /manual for re-flashing Atheros based hardware /DWL2100AP clones /appeared .

I did not covered it all but seems that is added tutorial for installing OpenWRT as a the new part – which is quite interesting. I must chek will the wireless will be working whit last versions of the Kamikaze firmware.

Another thing are schematics for jtag cables. Which is needed for re-flashing dlink dwl2100ap.

The main difficulty for installing openwrt is deferent flash types used in different revision of the access point.


Translated version of the article on

Resurrecting DWL-2100AP

Tuesday, May 29th, 2007

I have this clone of D-link DWL-2100AP.

It worked great for a 10 mounts – after that AP begin to continually rebooting. It is not possible to upload new firmware whit tftp.

Now whit OpenWrt on fonera there is more info how the staff works whit this atheros based APs. A lot of info is available on Italian and Russian sites.

What I make to re-flash my 108mb atheros ap. PCB is clone of DWL-2100AP rev.2.