On the www.lan23.ru are updated page for building wifi swr meter. mcWit was able to find replacement of the BAT62-03W Schottky diode used by pe2er.nl in his design. New diode is hsms-2822
There are several changes in the elements in due diode change. I can’t understand everything written on the site. But everything is there and all is build and tested.
Now just need to wait for more documentation.
Here is a picture of the finished device :
18 or 19dBi – no mater for this one 🙂 . Several dipoles printed on PCB board. Have more dipoles You get more dBis. Will it be 10 12 or 24 – You decide how much do You need.
This is defiantly homemade design. I have one small antenna whit only 4 dipoles – and it works great, so this antenna should work fine. Also will be easy to be rescaled for other bands – 2.4Ghz or 5Ghz only change dimension of the dipoles.
19dbi panel wifi antenna link to picture
Here is the photo from the other side of the pcb board and other part of feeding element
Picture is from this address : diy.wifi-live.pl/node/4 where also have blueprints for less dbi antenna .
On www.zero13wireless.net also has several files posted by sushisan .
Link to files 18dbipcbdipoleantenna.zip
At las time a lot of hits came from a Poland there are some good wifi forums but I cant find online translator 🙁
Here one interesting antenna from diy.wifi-live.pl
This is some strange Biquad and Yagi hybrid.
Dimensions :
/odległości:
deflektor- 36
/19
quad- 34
/17
direktor1 33
/17
direktor2 32
/17
direktor3 31
/17
direktor4 30
/17
direktor5 29
There are no results or testing for this antenna.
