Posts Tagged ‘jtag’

Resurrecting a bricked Netgear WGT624

Thursday, October 18th, 2007

Here You can find very good tutorial how to resurrect bricked Netgear router WGT264 without using a jtag cable :

There are some interesting steps in this tutorial. First is the step 4 were the trendnet firmware is stripped or converted from .img format to .elf file.

“… Step 4.

The TRENDnet firmware needs to converted from its .img format to the .elf format so that the file is bootable over TFTP. I used and the following Linux command to strip the superfluous header information :-

dd if=510APB_1121US.img of=510APB_1121US.elf skip=52 bs=1
Second interesting thing is that the author is used AP firmware to reflash router. May be will be possable to reflash a router and use different wireless modes like AP client or WDS ?

OpenWRT over DLink DWL2100AP ?

Saturday, October 6th, 2007

There a new second version of the tutorials /manual for re-flashing Atheros based hardware /DWL2100AP clones /appeared .

I did not covered it all but seems that is added tutorial for installing OpenWRT as a the new part – which is quite interesting. I must chek will the wireless will be working whit last versions of the Kamikaze firmware.

Another thing are schematics for jtag cables. Which is needed for re-flashing dlink dwl2100ap.

The main difficulty for installing openwrt is deferent flash types used in different revision of the access point.


Translated version of the article on